EMC Connectrix EC-1100 System User Manual page 150

Connectrix Manager Software Messages
A
R
Message:
Description:
Action:
Message:
Description:
Action:
Message:
Description:
Action:
S
Message:
Description:
Action:
Message:
Description:
Action:
Connectrix EC-1100 System User Guide
A-10
Remote sessions are not allowed from this address.
Only network addresses specified in the Session Options dialog box are
allowed to connect to the Connectrix service processor.
See your system administrator if you want this address to be configured
for remote sessions.
Remote session support has been disabled.
The ability for remote users to connect to the Connectrix service processor
has been disallowed.
See your system administrator, or modify the entries in the Session
Options dialog box.
Resource is unavailable.
Could not perform the last operation.
Verify that the link to the product is up. If the link is up, then the
Connectrix service processor may be busy. Try again later.
Service processor shutting down.
The Connectrix service processor has shut down for reasons unknown.
Exit the Connectrix Manager and reboot the computer.
SNMP trap address not defined.
If a community name is defined, a corresponding trap address must also
be defend.
Enter the corresponding trap address.