Option Modules - Siemens 9810 Series User Manual

Connection type
Environment
Operating temperature
Storage temperature
Humidity rating
Pollution degree
Altitude
IP degree of protection
Location/mounting
US2:948DISP96 display
Display
Display type
Display backlight
Keypad
Viewable area
Communication connection
Cable type
Cable length
Connection type
Environment
IP degree of protection

Option modules

US2:948M2AO4AI Analog (2 out, 4 in)
Maximum number of modules
Input resistance
Max analog input current/voltage
Maximum meter operating temperature
US2:948M2DO6DI Digital (2 out, 4 in)
Maximum number of modules
Maximum meter operating temperature
216
Direct, point-to-point
-20 ºC to 60 ºC (-4 ºF to 140 ºF)
-40 °C to 85 °C (-40 °F to 185 °F)
5% – 95% RH non-condensing
Maximum dewpoint: 37 °C (99 °F)
2
< 3000 m (9843 ft) above sea level
Front: IP65
Rear: IP30
For UL Type 12 applications, install display on a flat surface of a Type 12 enclosure
Not suitable for wet locations
For indoor use only
1/4 VGA color graphic TFT LCD 320 x 240 resolution
White LED
5 button
70.6 x 52.9 mm (2.78 x 2.08 in)
CAT5 (or higher). Use with unshielded RJ45 modular connector
100 m (330 ft) max.
Direct, point-to-point
Front: IP54
Rear: IP30
See your option module's installation sheet for additional option module
specifications.
4
< 300 Ω (current mode)
> 500 kΩ (voltage mode)
20 mA / 30 V DC
-25 ºC to Max temp (-13 ºF to Max temp)
Maximum operation temperature is based on the quantity and type
of attached option modules. See Maximum operating temperature
with option modules, page 214.
4
-25 ºC to Max temp (-13 ºF to Max temp)
Maximum operation temperature is based on the quantity and type
of attached option modules. See Maximum operating temperature
with option modules, page 214.
Specifications
7EN05-0390-00