Siemens 9810 Series User Manual page 107

Display
7EN05-0390-00
2. Press or to highlight the different setup menu selections. Highlight
Meter Setup and press
Mode setup screen is displayed.
to highlight Volts Mode. Press
3. Press
Enter Password screen is displayed.
4. Press to change the value of the highlighted digit (0 - 9). Press
the next digit. Press
keyboard. The Volts Mode configuration screen is displayed.
5. Press or to highlight the desired volts mode from the list, in this case,
3W-WYE. Press
screen is displayed, showing your meter's previous setting and newly
selected setting.
6. Press to confirm, and the new setting is applied to your meter. Press
to cancel and maintain your meter's original setting.
to select the meter setup screens. The Volts
to edit the volts mode. The
to enter your password using the onscreen
to select the highlighted volts mode. A confirmation
to go to
107