Webpages
Line #
Description
49
instantaneousReadings.initInstantaneousReadings('sample-readings');
Sample-readings is the unique name of the first webpage content name. This HTML code updates all of the webpage's
values.
1
Named registers are listed in the Modbus registers map. If the desired value is not listed, you can reference the value by its ION handle,
using the following format: <td regname="_0x####"</td>, where #### is the hexadecimal value of the ION handle.
Sample setup webpage
A
HTML filename
B
Content pane title
C
Sub-heading
D
Row heading
E
Named register value
F
Second content pane title
Sample HTML code for setup webpage content
Sample setup webpage content
Line #
Sample HTML
1
SampleSetupPane.html
2
7EN05-0390-00
You can create custom setup webpages using the sample webpage stored on
your meter.
Sample webpages are stored in the documents folder on your meter's internal
FTP site.
Your meter's Modbus register map is available from Siemens Industry.
If required, your meter's ION handles document is packaged with the meter
firmware file which is available for download from www.usa.siemens.com/pds.
Custom setup webpages must be stored on your meter's internal FTP site in the
folder for Setup. The custom webpage is viewed by selecting the Setup main
menu tab on your meter's webpage.
Configuring the HTML code other than where described is an advanced procedure
and should only be performed by those with an advanced understanding of
webpages and how your meter processes them.
Sample webpage setup result
NOTE: This graphic is representative only, and your meter's webpages may
appear different than shown.
Content and formatting of a setup webpage is controlled by its HTML code.
95