Alarm Management - Emerson Liebert Vertiv RDU-SIC G2 User Manual

16 Chapter 3 Web Page Of RDU-SIC G2
The procedures for adding a server shutdown task are as follows:
1. Select a UPS from the drop-down box of UPS Name;
2. In the Server IP field, type the IP address of the server to be closed;
3. Click the Add button, the server shutdown task is added, and the basic information of the UPS will be displayed in
the upper list of the page

Note
If you want to use the server shutdown function, please install 'Vertiv network shutdown' software in the server.
The procedures for deleting a server shutdown task are as follows:
Select the task to be deleted in the server shutdown task list, and click the Delete button to finish the operation.

3.4.3 Alarm Management

The Alarm Management menu supplies alarm centralized management function, enabling you of self-defining alarm
notification and alarm linkage rules, and viewing historic alarm.
On the RDU-SIC G2 homepage, click the Alarm Management menu on the left, three submenus appear, including
Current Alarm, History Alarm and Alarm Notification.
Current Alarms
Click Current Alarms under the Alarm Management menu, or refer to 3.3.5 Real-Time Alarm Pop-Up Setting, the
current alarm list will pop up, as shown in Figure 3-24.
1. You can click the tabs above the alarm list to view current alarms according to alarm levels.
2. Click the Acknowledge button to confirm the alarm. After conformation, no alarm notification about the conformed
alarm will be sent.
3. When the mouse is located on the Confirmed link, the alarm confirming information will be hovered; when you
move the mouse, the information will disappear, as shown in Figure 3-25.
History Alarm
Click History Alarm under the Alarm Management menu to look over historical alarm records. Select a device (for
instance, 'All Devices') and set the start time and end time (for instance, from 2015-04-24 00:00:00 to 2015-04-24
23:59:59). Then click the Query button, all alarm records generated between the start time and end time will be listed,
Figure 3-24 Current alarms
Figure 3-25 Confirming information
RDU-SIC G2 Card User Manual