Emerson Liebert Vertiv RDU-SIC G2 User Manual page 25

After the system reboots, adding a device becomes effective.
10) Log in the RDU-SIC G2 webpage again and the added device will appear in the list on device management page.

Note
Up to four intelligent devices (excluding RDU-SIC G2 itself) can be added in the system by default.
Deleting a device
1) Choose the device which needs to be deleted in the device list;
2) Click the Delete button to delete the device;
3) Click the Save Configuration button to make the settings become effective, and the detailed procedures are the
same as those of adding a new device.

Note
Before clicking the Delete button, if the device information has been modified, it cannot be deleted.
Modifying a device
1) Choose the device which needs to be modified in the device list;
2) Modify the device information;
3) Click the Modify button to make the setting effective;
4) Click the Save Configuration button to make the settings become effective, and the detailed procedures are the
same as those of adding a new device.
After adding, modifying or deleting procedures, if you leave the Add/Modify/Delete Device page without clicking the
Save Configuration button to make the settings effective, the prompt information will pop up to remind you of saving
the configuration, as shown in Figure 3-38.

Note
Clicking the Save Configuration button can save all the operations at one time.
2. Install/Uninstall Device Type
Click the Device Management under the Device Options menu, and then click the Install/Uninstall Device Type tab,
the page shown in Figure 3-39 pops up.
Figure 3-37 Reboot page
Figure 3-38 Prompt information 3
RDU-SIC G2 Card User Manual
Chapter 3 Web Page Of RDU-SIC G2 23