Emerson Liebert Vertiv RDU-SIC G2 User Manual page 22

20 Chapter 3 Web Page Of RDU-SIC G2
2. Export SNMP MIB
As shown in Figure 3-31, you can export MIB information according to device type. After selection, click the Download
button to export MIB information.
Figure 3-31 Export SNMP MIB
History Data
Click the History Data under the Data & History menu, the page shown in Figure 3-32 pops up. The page has two
tabs: History Data and Historical Curve.
Figure 3-32 History data
1. History Data
As shown in Figure 3-32, choose a device (for instance, 'All Devices') and the log type (for instance, 'History Data'),
and set the start time and the end time (for instance, from 2014-07-30 00:00:00 to 2014-07-30 23:59:59). Then click
the Query button, all the history data during the time will be listed, click the Download button to download the query
result.
2. Historical Curve
As shown in Figure 3-33, choose a device (for instance, 'ENV') and the query type (for instance, 'Temp2'), and set the
start time and the end time (for instance, from 2014-07-30 00:00:00 to 2014-07-30 23:59:59). Then click the Show
Curve button, if history data are queried, a historical curve of the signal will be shown.
RDU-SIC G2 Card User Manual