Emerson Liebert Vertiv RDU-SIC G2 User Manual page 20

18 Chapter 3 Web Page Of RDU-SIC G2
On the page shown in Figure 3-28, you can perform SMS Modem Configuration for alarm notification reminding
through SMS or phone, you can also perform Email Server Configuration for alarm notification reminding through
email, the procedures are as follows:
SMS Modem Configuration
1) Connect an SMS Modem through USB port according to need, and choose Port Type, the page will display
Parameter automatically;
2) Choose SMS Modem (GPRS/CDMA) according to the SMS Modem type;
3) Set the communication parameter of the SMS Modem;
4) Click the Save Configuration button to save the configuration of current user's SMS Modem.

Note
If the SMS Modem is connected through USB port, you need to set the jumper by referring to Table 2-1.
Email Server Configuration
1) Type the server IP address or domain name in the Email Server field;
2) Type the Server Port, Email User, Email Password and Sender Email Address in the corresponding fields;
3) Click the Save button to save the configuration of current user's Email server.

Note
1. The Server Port is '25' by default. When SSL is chosen, the Server Port will become '465' automatically;
2. The Email User is 'RDU-A' by default;
3. When using SSL, you need to ensure that the Email server supports SSL function.
3. Scheduled Notification Configuration
Click the Alarm Notification under the Alarm Management menu, and then click the Scheduled Notification
Configuration tab, the page shown in Figure 3-29 pops up.
Figure 3-28 SMS/Email server configuration
RDU-SIC G2 Card User Manual