Emerson Liebert Vertiv RDU-SIC G2 User Manual page 30

28 Chapter 3 Web Page Of RDU-SIC G2
4) Set the User Type: 'Authenticated & Encrypted', 'Authenticated & Not Encrypted', 'Not Authenticated & Not
Encrypted';
5) Select Authentication Protocol: 'MD5', 'SHA';
6) Select Privacy Protocol: 'DES';
7) Self-define Authentication Password and Privacy Password.

Note
1. On the base of SNMP V2, SNMP V3 adds user authentication and privacy strategies.
2. If you select 'Not Authenticated & Not Encrypted' for User Type, the drop-down boxes of Authentication Protocol and
Privacy Protocol will become gray, so you cannot set them;
3. Currently, only 'DES' is supported for Privacy Protocol.
4. You need to self-define Authentication Password and Privacy Password, which contain at least 8 characters, and be the
same as the password set by the host of SNMP agent data receiving end, or it cannot be decrypted and received.
After parameter setting, click the Add button to add NMS;
If you need to modify NMS setting, select the NMS which needs to be modified, modify the setting and then click the
Modify button to save the setting;
If you need to delete NMS, select the NMS which needs to be deleted, and then click the Delete button to delete the
NMS.
Figure 3-48 SNMP V3 setting
4. Remote Service
Click the Network Setting under the System Options menu, and then click the Remote Service tab, the page shown
in Figure 3-49 pops up.
RDU-SIC G2 Card User Manual