Safe Shutdown - Emerson Liebert Vertiv RDU-SIC G2 User Manual

14 Chapter 3 Web Page Of RDU-SIC G2
You can set several signals at the same time, and at most 16 signals can be set at the same time for each time.
Alarm
Clicking the Alarm tab can enter the alarm page, which displays alarm signals of selected device, as shown in
Figure 3-18.
You can set alarm level of several alarm signals at the same time, and at most 16 signals can be set at the same time
for each time.

3.4.2 Safe Shutdown

On the RDU-SIC G2 homepage, click the Safe Shutdown menu on the left, two submenus appear, including
Shutdown Schedule and Server Shutdown.
Shutdown Schedule
Click Shutdown Schedule under the Safe Shutdown menu, the page shown in Figure 3-19 pops up.
The Shutdown Schedule page is used to add, delete and modify schedule shutdown task of UPS devices.
As shown in Figure 3-19, type a task name of schedule shutdown in the field of Task Name, select a Target
Equipment, select whether to enable the task in the Status field, select ShutDown Mode and Open Mode, and then
add Open Time according to the corresponding prompt, the page is shown in Figure 3-20.
Figure 3-18 Alarm signals
Figure 3-19 Shutdown Schedule page
Figure 3-20 Schedule shutdown task list
RDU-SIC G2 Card User Manual