Emerson Liebert Vertiv RDU-SIC G2 User Manual page 17

Click the Add Schedule Shutdown button, the task will be successfully added. As shown in Figure 3-21, a new task
has been added in the schedule shutdown task list. The tasks in the task list will be executed automatically according
to their Enable/Disable status.
The descriptions about the RDU-SIC G2 schedule shutdown function are as follows:
1. When the Open Mode is set to 'Do Not Open Device' or 'Open Device At Once', the Open Time cannot be set, and
it is displayed as '--';
2. The format of ShutDown Time changes with different options of ShutDown Mode automatically, as shown in
Figure 3-22.

Note
1. The RDU-SIC G2 can support up to ten shutdown tasks.
2. Only when 'Enable Device' is set for Status can the schedule shutdown task be enabled.
Server Shutdown
Click Server Shutdown under the Safe Shutdown menu, the Server Shutdown page will pop up, as shown in
Figure 3-23.
On the Server Shutdown page, you can add and delete server shutdown task.
Figure 3-21 Schedule shutdown task list
Figure 3-22 Format of shutdown time
Figure 3-23 Server Shutdown page
RDU-SIC G2 Card User Manual
Chapter 3 Web Page Of RDU-SIC G2 15