Emerson Liebert Vertiv RDU-SIC G2 User Manual page 19

Chapter 3 Web Page Of RDU-SIC G2 17
including: Index, Device Name, Signal Name, Alarm Level, Trigger valve, Start Date/Time, Confirmed by,
Confirmed on Date/Time and End Date/Time, as shown in Figure 3-26.
Figure 3-26 History alarm query
Click the Download button to download the query results.
Alarm Notification
1. User Alarm Notification Configuration
Click the Alarm Notification under the Alarm Management menu, the page shown in Figure 3-27 pops up. You can
choose the notification method to receive notification of chosen level alarm from chosen equipment, meanwhile, you
can also choose the language of alarm notification information and customize the alarm content (including Equip name,
Alarm description, Alarm TIME and Alarm state by default).
Click the Save button to finish the alarm configuration. When an alarm is generated, the system will notify users
through the chosen notification method.

Note
1. Users must tick the notification method first in the Notification by check boxes, and then the alarm table below can be edited;
2. When all devices are chosen, all devices will be configured with the same alarm level;
3. When low level alarm is chosen, the alarm level above this level will also be chosen;
4. When some device is chosen, the highest level Critical Alarm will be chosen by default.
Figure 3-27 User alarm notification configuration
2. SMS And Email Server Configuration
Click the Alarm Notification under the Alarm Management menu, and then click the SMS And Email Server
Configuration tab, the page shown in Figure 3-28 pops up.
RDU-SIC G2 Card User Manual