On the page shown in Figure 3-41, you can modify the device name. Type the new device name and click the Set
button to make all setting effective.
Note
The characters of device name and signal name can be English letters, digits, space and underline. If other characters are typed,
the prompt box shown in Figure 3-42 will pop up.
Batch Configuration
Click the Batch Configuration under the Device Options menu, the page shown in Figure 3-43 pops up.
On the page, you can perform Upload and Download operations to complete batch configuration.
Note
1. Only 'admin' has the authority of batch configuration. If you fail in performing batch configuration, please click Show Help to
view the help information.
2. The batch configuration file is encrypted after downloaded to local.
Figure 3-41 Modify device name
Figure 3-42 Prompt box of invalid characters
Figure 3-43 Batch configuration
RDU-SIC G2 Card User Manual
Chapter 3 Web Page Of RDU-SIC G2
25