Data & History - Emerson Liebert Vertiv RDU-SIC G2 User Manual

Chapter 3 Web Page Of RDU-SIC G2 19
Figure 3-29 Scheduled notification configuration

Note
1. Scheduled notification configuration must be used together with user alarm notification configuration; otherwise, you cannot
select User Name, Notification by and Language Type;
2. For scheduled notification configuration, the notification method 'Phone' is not supported;
3. The scheduled notification means sending the running state of the RDU-SIC G2 system (normal or alarm) to the user.
1) First of all, on the User Alarm Notification Configuration page, complete and save the setting of User,
Notification by and Language Type.
2) On the Scheduled Notification Configuration page, set the Notification Enabled Period (setting range: 8:00 ~
20:00), Notification Scheduled Cycle (default: Hour), Interval of Notification (default: 1) and Send Time Setting
(default: start time).
3) Click the Save button to save the system notification configuration.
3.4.4 Data & History
The Data & History menu supplies query service of all types of historical data and logs for the user.
On the RDU-SIC G2 homepage, click Data & History in the left part, four submenus appear, including: Device
Information, History Data, History Log and Clear History.
Device Information
Click the Device Information under the Data & History menu, the page shown in Figure 3-30 pops up. The page
includes two tabs: Device Information List and Export SNMP MIB.
1. Device Information List
As shown in Figure 3-30, the page lists the main information of all equipment. Click the Download button to download
the query result.
Figure 3-30 Device information list
RDU-SIC G2 Card User Manual