Download  Print this page

Embroidering A Pattern; Embroidering Attractive Finishes - Brother 882-W80 Operation Manual

Hide thumbs

Advertisement

EMBROIDERING A PATTERN

b
From
, press the key for the position that you
want to check.
1 Selected position
 The carriage will move to the selected position on
the pattern.
Memo
• To see the entire embroidering area, press
The carriage moves and shows the embroidery
area.
CAUTION
• Make sure the needle is up when the carriage
is moving. If the needle is down, it could break
and result in injury.
c
Press
.
62
EMBROIDERING A PATTERN

Embroidering Attractive Finishes

Many factors are involved in achieving a beautiful
embroidery result. Using the appropriate stabilizer
(page 55) and hooping the fabric in the frame (page 56)
are two important factors mentioned earlier. Another
important point is the appropriateness of the needle and
thread being used. See the explanation of threads
below.
Thread
1
Bobbin thread Use embroidery bobbin thread
Memo
• If you use threads other than those listed above,
the embroidery may not embroider out correctly.
Bobbin case (recommended for embroidering with
included 90 weight bobbin thread)
.
1 Bobbin case (no color on the screw)
The included bobbin case is set for 90 weight bobbin
thread. When you use different weights of bobbin
thread, the tension screw on this bobbin case can be
adjusted if necessary. For details, refer to "Adjusting the
Bobbin Case (with No Color on the Screw)" on
page 75.
• When embroidering on large garments
(especially jackets or other heavy fabrics), do
not let the fabric hang over the table.
Otherwise, the embroidery unit cannot move
freely and the embroidery frame may strike the
needle, causing the needle to bend or break
and possibly cause injury.
Place the fabric so that it does not hang off the
table or hold the fabric to keep it from
dragging.
■ Embroidery Needle Plate Cover
Under some conditions, based on the type of fabric,
stabilizer, or thread being used, there may be some
looping in the upper thread. In this case, attach the
included embroidery needle plate cover to the needle
plate. Attach the cover by inserting the two projections on
Upper thread Use embroidery thread intended for
use with this machine.
intended for use with this machine.
CAUTION

Advertisement

Table of Contents

   Related Manuals for Brother 882-W80

This manual is also suitable for:

882-w82

Comments to this Manuals

Symbols: 0
Latest comments: