This USB media is incompatible.
USB media error
Use the presser foot lifter button to lower the
Use the presser foot lifter button to raise the presser
■ Alarm Sounds
If the operation was performed incorrectly, an alarm sounds to indicate that an error occurred. If the operation was performed
correctly, the machine beeps to confirm the operation.
• To cancel the operation beep or to change the volume, press
Speaker Volume]. Refer to page 16 for more details.
This message is displayed when you try to use incompatible USB media.
For a list of compatible USB media, visit " http://s.brother/cpeab/ ".
This message is displayed when an error occurs with the USB media.
This message is displayed when a button, such as the "Start/Stop" button, is
pushed while the presser foot is raised.
This message is displayed when the embroidery unit is attached and the
power is turned on with the needle in the down position.
and then change the setting for [Machine