WINDING/INSTALLING THE BOBBIN
f
Pass the thread through the thread guide.
1 Thread guide
g
Pass the thread around the pretension disk making sure
that the thread is under the pretension disk.
Pull the thread as far as possible.
1 Pretension disk
2 Thread guide
h
g
Follow steps
page 25.
26
a
a
j
through
on page 24 through
Setting the Bobbin
CAUTION
• Use a bobbin that has been correctly wound
with thread, otherwise the needle may break
or the thread tension will be incorrect.
• Before inserting or changing the bobbin, be
sure to press
and buttons. Otherwise injuries may occur if
the "Start/Stop" button or any other button is
pressed and the machine starts embroidering.
a
Press
to lock all keys and buttons and raise the
presser foot.
*
If the message [OK to automatically lower the
presser foot?] appears on the LCD screen, press
to continue.
b
Slide the bobbin cover latch to the right and remove
the bobbin cover.
c
Insert the bobbin into the bobbin case so that the
thread unwinds to the left.
in the LCD to lock all keys