Table of Contents
Advertisement
CONNECTING THE ACCESSORY TO
THE MACHINE
Using a USB Mouse (Sold Separately)
The USB mouse, connected to the machine, can be
used to perform a variety of operations in the screens.
Connect a USB mouse to the USB port.
Memo
• If a mouse other than the optional USB mouse is
used, it may not perform as described in this
Operation Manual.
a
Note
• Only the left mouse button can be used to perform
operations. Double-clicking has no effect. No other
buttons can be used.
• The mouse pointer does not appear in the screen
saver or opening screen.
■ Clicking a Key
When the mouse is connected, the pointer appears on the
screen. Move the mouse to position the pointer over the
desired key, and then click the left mouse button.
1 Pointer
1 USB port
2 USB mouse
1
CONNECTING THE ACCESSORY TO THE MACHINE
WINDING/INSTALLING THE
BOBBIN
Winding the Bobbin
CAUTION
• The included bobbin was designed specifically
for this machine. If bobbins from other models
are used, the machine will not operate
correctly. Use only the included bobbin or
bobbins of the same type (part code: SA156,
SFB: XA5539-151 / 115J05E0001, SFB:
115J05E7001). SA156 is Class 15 type bobbin.
■ Using the Supplemental Spool Pin
With this machine, you can wind the bobbin during
embroidering. While using the main spool pin for
embroidery, you can conveniently wind the bobbin using
the supplemental spool pin.
a
1 Supplemental spool pin
a
Turn the main power to ON and open the top cover.
b
Align the groove in the bobbin with the spring on the
bobbin winder shaft, and set the bobbin on the shaft.
a
1 Groove in the bobbin
2 Spring on the bobbin winder shaft
c
Place the spool of thread for the bobbin and the spool
cap onto the supplemental spool pin.
Slide the spool onto the supplemental spool pin so that
the thread unwinds to the front from the bottom.
1
23
Advertisement
Table of Contents
