Download  Print this page

Using Appliqués - Brother 882-W80 Operation Manual

Hide thumbs

Advertisement

EMBROIDERING A PATTERN
Memo
• The thread trimming function is originally set to trim
excess thread jumps (threads linking parts of the
pattern, etc.). Depending on the type of thread and
fabric that are used, an end of upper thread may
remain on the surface of the fabric at the beginning
of the stitching. After embroidering is finished, cut
off this excess thread.
If the setting has been turned off, trim the excess
thread jumps using scissors after the pattern is
finished. Refer to page 76 for information on the
thread trimming function.
CAUTION
• Do not press
the threads have been cut. Doing so could
tangle the thread or break the needle and
damage the machine.
• Do not press
there is no fabric set in the machine or during
machine operation. The thread may tangle,
possibly resulting in damage.
Using Appliqués
When the color embroidering order display shows
[
(APPLIQUE MATERIAL)],
[
(APPLIQUE POSITION)] or
[
(APPLIQUE)], follow the procedure below.
Required materials
• Fabric for the appliqué piece
• Fabric for the appliqué base
• Stabilizer material
• Fabric glue or temporary spray adhesive
• Embroidery thread
Note
• The correct names and numbers of the thread
colors to be used will not appear. Use the thread
colors depending on those in the appliqué pattern.
64
(Thread cutter button) after
(Thread cutter button) when
■ 1. Creating an Appliqué Piece
a
Attach stabilizer material to the wrong side of the
fabric for the appliqué piece.
b
Sew the cutting line of the appliqué piece. Remove the
fabric for the appliqué piece from the embroidery
frame, and then carefully cut along the sewn cutting
line.
a
1 Outline of appliqué
2 Fabric for appliqué piece
Note
• If the appliqué piece is cut out along the inside of
the cutting line, it may not be correctly attached to
the fabric. Therefore, carefully cut out the appliqué
piece along the cutting line.
• After cutting out the appliqué piece, carefully
remove the thread.
■ 2. Sewing the Appliqué Position on the Base
Fabric
a
Attach stabilizer material to the wrong side of the
fabric for the appliqué base.
b
Sew the appliqué position.
a
c
Remove the embroidery frame from the embroidery
unit.
Note
• Do not remove the base fabric from the embroidery
frame until all embroidering is finished.
1 Position of appliqué
2 Base fabric

Advertisement

Table of Contents

   Related Manuals for Brother 882-W80

This manual is also suitable for:

882-w82

Comments to this Manuals

Symbols: 0
Latest comments: