Connect/Disconnect The Transfer Chair - Arjohuntleigh Malibu Instructions For Use Manual

Connect/Disconnect the Transfer Chair

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Connect Detachable Transfer Chair to the Lift
Arm (7 steps)
1 Set the bathtub in its lowest position by pushing Lower
bathtub on the control panel.
2 Push the Lift out button on the hand control to have the lift
arm positioned outside the bathtub.
3
WARNING
To avoid the patient from falling out of the
device, make sure that all catches are in a locked
position.
4 Place the transfer chair to the attachment of the lift arm and
hook up the transfer chair. (See Fig. 1)
5
WARNING
To avoid entrapment, make sure to keep the
patients hair, arms and feet close to the body
and use designated grab supports during any
movement.
6 Raise the lift arm by pushing down the Lift in button on the
hand control, so that the transfer chair is secured on the lift
arm and the wheel chassis is clear of the floor. (See Fig. 2)
7 Pull out the spring loaded catch to release the wheel chassis
from the transfer chair and at the same time slide out the
wheel chassis sideways from the chair. (See Fig. 3 and 4)
20