Electromagnetic Compatibility - Arjohuntleigh Malibu Instructions For Use Manual

Electromagnetic Compatibility

Product has been tested for compliance with current regulatory standards regarding its capacity to block EMI
(electromagnetic interference) from external sources.
Some procedures can help reduce electromagnetic interferences:
• Use only ArjoHuntleigh cables and spare parts to avoid increased emissions or decreased immunity which can
compromise the correct functioning of the equipment.
• Ensure that other devices in patient-monitoring and/or life-support areas comply to accepted emissions
standards.
WARNING
Wireless communications equipment such as wireless computer network devices, mobile
phones, cordless telephones and their base stations, walkie-talkies, etc. can affect this
equipment and should be kept at least 1.5 m away from the equipment.
Intended Environment: Home Healthcare Environment and Professional Healcare facility environment.
Exceptions: HF Surgical Equipment and the RF Shielded room of an ME SYSTEM for magnetic resonance
imaging.
WARNING
Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this equipment and
the other equipment should be observed to verify that they are operating normally.
Guidance and manufacturer's declaration – electromagnetic emission
Emission test
RF emissions CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions IEC
61000-3-3
Compliance Guidance
Group 1 This equipment uses RF energy only for its internal functions.
Therefore its RF emissions are very low and are not likely to
Class B
cause any interference in nearby electronic equipment.
This equipment is suitable for use in all establishments,
including domestic establishments and those directly connected
Class B
to the public low voltage power supply network that supplies
buildings used for domestic purposes.
Complies
52