Arjohuntleigh Malibu Instructions For Use Manual page 16

Fig. 6
Fig. 7
Fig. 8
A
Fig. 9
Fig. 10
A
B
A
B
B
2 Loosen the safety belt by pulling the inner strap (A) at the
side and at the same time lifting the larger fastening
clip (B). (See Fig. 6)
3 Tighten the safety belt by pulling the outer strap (A) at the
side and at the same time holding the larger fastening
clip (B). (See Fig. 7)
4 Make sure the safety belt is firmly attached to the patient's
body.
5 Lock the fastening clips by inserting the smaller fastening
clip (A) into the larger fastening clip (B). (See Fig. 8)
When not in use (1 step)
1 Make sure that the safety belt is buckled over the seat when
the transfer chair is not in use. (See Fig. 9).
Remove (2 steps)
1 Remove the safety belt by pulling it away from the knobs at
the back of the chair. (See Fig. 10).
2 It is also possible to unscrew the knobs at the back of the
chair.
16