Arjohuntleigh Maxi Twin Quick Reference Manual

QUICK REFERENCE GUIDE - USE
Maxi Twin
Transfer from chair
1
Place the sling around the patient so that it
covers the lower back and the head support
covers behind the head. Pull each leg piece and
position it under each thigh.
4
For lifts with DPS spreader bar: Press down on
the positioning handle and attach the leg strap
clips.
2
Position the lift in front of the patient.
If needed, open the chassis legs.
Adjust the spreader bar to shoulder height
5
Risk of
Risk of
falling
entrapment
Make sure the brakes are not applied.
Make sure sling is secured before
lifting the patient.
08.KT.01EN_1 • 07/2020 • Page 1/3
3
Loop sling
Latch
closed
Attach the sling attachment clips or loops to the
appropriate points on the spreader bar.
.
Using the hand control raise the patient, adjust the
positioning handle until the patient is reclined in
the sling.
Continue with the steps on the next page
Clip sling