Transfer - Arjohuntleigh Maxi Air Instructions For Use Manual

Transfer

Transfer
10
Transfer between surfaces
Fig. 9
Sending surface/side = surface the patient
lays on
Receiving surface/side = surface the patient is
transferred to
1) Apply the brakes on the sending surface.
2) Make sure the patient is in a horizontal
position.
WARNING
To avoid the patient from falling or
caregiver from being injured, ensure that
there are two or more caregivers present
during the transfer.
Position one caregiver on each side of the
Fig. 10
patient, see "Fig. 10".
3) Place the Maxi Air mattress with the labels
upwards, underneath the patient. Follow
local routines.
4) Make sure the patient is correctly placed on
the Maxi Air mattress.
WARNING
To prevent patient from rolling off the
Maxi Air mattress, the safety belts must
be used during the entire movement.
Attach the safety belts loosely. If the belts
are attached too tight, they can cause
discomfort during the infl ation. Tighten them
after the infl ation, see "Fig. 11"
5) Adjust the receiving surface to an ergonomic
height.
6) Place the receiving surface as close as
possible to the sending surface
Fig. 11
Transfer