Product Description/Functions; Control Panel; Hand Control; Patient Lock-Out - Arjohuntleigh Malibu Instructions For Use Manual

Product Description/Functions

Fig. 1
B
A
Fig. 2
Fig. 3
A
B
Fig. 4

Control Panel

Lower/Raise bathtub
WARNING
To avoid the device in use from tipping, do not raise
or lower other equipment close to it and be aware of
stationary object when lowering.
Push and hold Lower bathtub (A) to lower the bathtub. Push
and hold Raise bathtub (B) to raise the bathtub. (See Fig. 1)

Hand Control

The hand control can be placed in the holder either on the left
or centre of the front panel when not in use. (See Fig. 2)
Lift in
Push and hold the Lift in button (A) and the lift arm will
complete a full sequence of movement; from outside the
bathtub, over the bathtub edge and into the bathtub.
(See Fig. 2)
NOTE
The bathtub must be set in its lowest position before the
rotation of the chair with the Lift in/out buttons can be
used.
NOTE
A slight jerk can follow the start of lift rotation movement
into the bathtub. It is fully normal.
Lift out
Push and hold the Lift out button (B) and the sequence will be
performed in the reverse order. (See Fig. 3)
If the bathtub is not in the lowest position when the chair is in
the bathtub trying to lift out (rotate), the chair will stop and the
LED for lowering the bathtub on the control panel will light
up.

Patient Lock-out

B
Push and hold the patient lock out button (A) for 3 s and it will
disable all panel and remote buttons, preventing involuntary
A
activation of functions. Patient lock-out is indicated by a yellow
LED (B). (See Fig. 4)
Push and hold for another 3 s to re-enable all the functions.
10