Open The Water Shut-Off Valve; Insert The Power Plug Into The Outlet - American Standard Advanced Clean 3.0 SpaLet User Manual

Names of Parts/Preparation and Checks Before Use
Vacuum Breaker
Vacuum breaker
* The vacuum breaker is built into the seat unit.
The vacuum breaker requires periodic inspection.
Mounting Plate and Lock Lever
Seat unit
Toilet bowl
* The mounting plate is used to remove
the seat unit from the toilet bowl for cleaning
and maintenance. (+ Page 32)
WARNING
Connect the grounding wire
securely to the grounding
terminal of the power outlet.
Grounding
* Failure to observe this warning
can result in electric shocks.
WARNING
● ● This product should
be connected only to a
120-VAC power source.
Prohibited
● ● Do not use a multi-outlet
socket.
* Failure to observe this warning
may cause a fire.
7 - EN
STEP
1
Mounting plate
STEP
2
Lock lever
l Seat unit indicator section
● Then check that the power LED

Open the Water Shut-off Valve.

* If the water shut-off valve is closed, turn it counterclockwise
to open.
If the valve is already open, its position has been adjusted.
Be sure to set the valve to the original position if you turn it.
Insert the Power Plug
Into the Outlet.
* Confirm that the power LED on the seat unit is lit.
Power indicator
lights.
* The power LED on the indicator lights (green).
If the power LED does not light, the main power may have
been turned off. If "OFF" is displayed on the LCD, press
Power button on the remote control.
[CAUTION]
• When disconnecting and reconnecting the power plug,
wait for approximately 10 seconds before reconnecting.
Water shut-off valve
Turn counterclockwise
Power plug