Warm Air Dryer - American Standard Advanced Clean 3.0 SpaLet User Manual

General Operation
STEP
4

Warm Air Dryer

Warm Air Drying
Warm air is blown to dry the area washed by the nozzle spray.
* The front cleansing nozzle extends and pushes the nozzle shutter down
during the warm air drying operation.
● Press the [Dryer] button.
* There are three levels of air temperature available.
* The deodorizer function stops temporarily during
the drying operation.
● Press the [Stop] button
to stop operation.
Changing Air Temperature
Press the [Dryer] button again while drying.
* Every time the button is pressed, the air temperature and indicator LED will make a level change from
Medium to High, High to Low, and back to Medium again.
* The indicator LED will be off in several seconds.
* When the dryer is stopped, the setting will return to the initial setting.
WARNING
Be sure to set the drying tempera-
ture to the "Low" setting when
the SpaLet
OBSERVE
the following types of users.
• Children
• Elderly persons
• Persons with illness
• Persons with limited mobility
• Persons with sensitive skin
• Persons who are taking medication that
causes drowsiness
• Persons who are under the influ-
ence of alcohol
• Persons who are suffering from
exhaustion
* Using the dryer for an extended period of
time at some other setting may result in
burns.
17 - EN
Dryer
Medium
®
seat will be used by
Dryer Dryer
High Low
(Reference)
• After cleansing, you can dry faster by wiping gen-
tly with toilet paper to remove water drops before
pressing the [Dryer] button.
Warm air drying
This SpaLet seat is equipped with an auto-stop function
so that operation stops automatically after 4 minutes.