American Standard Advanced Clean 3.0 SpaLet User Manual page 49

Seat heating
Symptom
The seat temperature is not set to
an appropriate temperature.
®
The SpaLet seat
is not warm.
The power save function is acti-
vated.
The seat heater auto off function is
The seat cools
turned on.
after sitting on the
SpaLet seat for
The seat has been used for over
an extended pe-
an hour.
riod of time.
The heating function of the SpaLet seat primarily functions to heat the
Side of SpaLet
top surface, so the side may feel cold to the touch. This is a feature of
seat is cold.
the product and is not a malfunction.
Deodorizer
Symptom
The automatic deodorizing function
is turned off.
The deodorizer
fan does not op-
erate. The seat has been used for over 2
hours.
Dirt is present on the deodorizing
The deodorizing
filter.
effect has weak-
ened (odors are
The SpaLet seat has not been
noticeable).
used for a long period of time.
Cause
Set the seat temperature to an ap-
propriate temperature.
Cancel the power save function.
Turn off the seat heater auto off
function.
The seat heater is automatically
turned off if a user sits on the SpaL-
et seat for over an hour. Stand up
from the seat and sit down again.
Cause
Turn on the deodorizer.
The seat sensor may make false
detections. The deodorizer fan turns
off automatically when a detection
triggered state lasts for at least 2
hours. Clean the SpaLet seat or try
standing up from the seat and sitting
back down again.
Clean the deodorizing filter.
The SpaLet seat is equipped with a
part that absorbs odors. Have this
part replaced.
Solution
Solution
Page
10
18
20
-
22
Page
19
-
39
-
46 - EN