American Standard Advanced Clean 3.0 SpaLet User Manual page 23

Restoring the Default Settings
If the settings of this product have been changed using the operation as described in "Useful Functions", all settings can
always be reset to the default settings whenever desired.
Press and hold both the [Nozzle Position
buttons for at least 2 seconds.
■Default settings
The following table lists the default settings.
Deodorizer
Power Save
Water temp.
Seat temp.
Seat heater auto off
Drying
Remote control operation sound
Intermittent nozzle drain
Storing Settings Changes
Settings changes are stored and therefore not lost when the power plug is disconnected from the outlet or the power
switch is turned off.
Note that the one-touch power save settings are reset when the power plug is disconnected from the outlet.
(+ Page 18)
[Nozzle Position
Function
Automatic deodorizing
One-touch power save
Advanced power save
Startup air temperature
] + [Power Save]
Default Setting
ON
OFF
OFF
Low
Low
OFF
Medium
ON
OFF
] and [Power Save]
20 - EN