American Standard Advanced Clean 3.0 SpaLet User Manual page 51

Other
Symptom
There are wa-
ter drops on the
Water drops from the spray land on
underside of the
the underside of the SpaLet seat.
®
SpaLet seat.
The seat unit is not locked in place.
The seat unit is
unstable.
The mounting plate is loose.
A gurgling sound
comes from the
SpaLet seat
This is not a malfunction.
● Power plug is
This is the sound of the motor operating during normal SpaLet seat op-
connected to
eration. If the water pressure and nozzle position can be adjusted prop-
erly, then there is no problem.
an outlet
● Nozzle spray
has stopped
Water supply is not connected to
the SpaLet seat due to a suspend-
ed water supply or closed water
shut-off valve.
The power indi-
cator is flashing.
Several functions are malfunction-
ing.
An anti-freezing heater is attached
to the water supply hose or other
pipe.
Cause
Frequently wipe the water drops.
Additionally, sitting further back on
the seat when using the spray will
lessen splashing.
Press down the seat unit to ensure
that it is firmly locked in place.
Tighten the mounting nuts.
After restoring the water supply,
open the water shut-off valve and
test operation.
If the power LED is still flashing,
then disconnect the power plug
and have the SpaLet seat ser-
viced.
If the power LED flashes after the
power has been turned off, this
indicates that the SpaLet seat is
damaged. Disconnect the power
plug from the outlet and have the
SpaLet seat serviced.
Turn off the anti-freezing heater.
When the water temperature ex-
ceeds 104°F, the safety system in
this product stops operation.
Solution Page
-
42
-
-
7
-
-
48 - EN