American Standard Advanced Clean 3.0 SpaLet User Manual page 50

Troubleshooting
Warm Air Drying
Symptom
Warm Air Does
Not Come Out
Warm Air is Not
Warm
Warm air stops
midway through
the process.
Bowl Spray
Symptom
The bowl spray
function does not
operate.
47 - EN
Cause
Seat sensor is not triggering.
The warm air drying temperature is
not set to an appropriate tempera-
ture.
Differences in temperature can be felt in accordance with usage condi-
tions. The air temperature is compliant with International Electrotechnical
Commission (IEC) standards.
This function has been used for
more than 4 minutes.
Cause
The bowl spray function is set to
OFF.
The bowl spray will not be activated
immediately after the user stands
up from the SpaLet seat.
Solution
®
Sit on the SpaLet seat.
Set the warm air drying temperature
to an appropriate temperature.
Press the [Dryer] button again.
Solution
Set the bowl spray function to ON.
Mist will not be sprayed if a person
sits on the SpaLet seat again within
approximately 80 seconds after
standing up from the SpaLet seat.
As long as the inside of the bowl
is wet, there still is an effect of the
bowl spray. There is no problem in
using the product.
Page
21
10
-
17
Page
13
H Function for
comfort enhancement
13