Set/Eject/Park Button; Pitch Button - Star Micronics NX-2420 Multi-Font User Manual

Star micronics printer user's manual
Table of Contents

Advertisement

If you
alSO
press
the
(
ON LINE
) button while
you
are
line-feeding,
t.he
paper will feed automatically to the top of the next page. This is explained
later.
If you press this button while on-line, this will alternately flash the
QUIET
indicator on and off. When in Quiet mode with the
QUIET
indicator lit, the
printer will print slightly slower, but at a reduced noise level.
SET/EJECT/PARK button
NOTE:
This button has no effect if the bottom feed mode is selected.
Pressing this button causes the printer to begin paper loading if the paper has
not loaded while in the off-line state.
If the paper has been loaded, this button results in different functions de-
pending on the position of the release lever.
If the mlcase lever is forward for fanfold forms, pressing this button parks
the forms.
If the release lever is back for single sheets, pressing this button ejects the
paper.
PITCH button
This button allows you to select the printing pitch. Remember that the printer
must be off-line for you to do this. Successive presses of this button will
illuminate (and select) the following options in order (Note that semi-
condesed pitch is not available in the IBM mode):
Pitch
Indicator(s)
Pica (10 CPI)
10 CPI
Elite (12 CPI)
12 CPI
Semi-condensed (15 CPI)
15 CPI
Condensed pica (17 CPI)
10 CPI, COND
Condensed elite (20 CPI)
12 CPI, COND
Proportional
PROP
Condensed proportional
PROP, COND
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx-2420 rainbowNx-2420 colour

Table of Contents