Setting Up; Mounting The Platen Knob; Installing The Ribbon Cartridge And The Roller Unit - Star Micronics NX-2420 Multi-Font User Manual

SETTING UP
Place the printer in the desired location, and remove all packing material
from inside the top cover. This packing material is intended to prevent
damage to the printer while in transit. You will want to keep all the packing
material, along with the printer carton, in case you have to move the printer
to a new location.
Mounting the platen knob
The platen knob is packed into a recess of the packing material which held
your printer inside the carton. Be sure to remove the knob from the
packaging.
.
Mount the knob on the platen shaft, which is on the right-hand side of the
printer. Rotate the knob on the shaft before pushing the knob fully into
position.
haten knob
F/gun, 1-3. Mounting the platen knob
Installing the ribbon cartridge and the roller unit
Remove the top cover by lifting up the front (using the two grips on either
side), and pulling the cover towards you (see Figure l-4). Now install the
ribbon. (If you want the color printer to print in black only, install the optional
monochrome ribbon cartridge, Z24HD or LZ24.)
NOTE: Turn off the power switch when you replace the ribbon cartridge.
4