Table of Contents
Advertisement
LOADING SINGLE SHEETS
This section will take you through the procedures for loading single sheets
of paper.
If you are using the optional automatic sheet feeder (SF-lODQ), refer to the
ASF instruction booklet.
Automatic loading
Single sheets can be loaded manually with the power off, or automatically
with the power on. We will start the easy way with automatic loading.
1. Place the paper guide in position by inserting the tabs, located on the
bottom of the assembly, into the slots on the rear cover of the printer.
Figure I-10. Mounting the paper guide for single sheets
2. Adjust the paper guides to match the size of the paper you will be using.
Remember that printing will start some distance from the left-hand edge
of the carriage.
3. Turn on the power using the switch located at the front of the printer. The
printer will beep, indicating that there is no paper in position for printing.
The
orange
POWER
indicator will also flash to confirm this.
10
Advertisement
Table of Contents
