Star Micronics NX-2420 Multi-Font User Manual page 79

Set horizontal tab stops
Mode ASCII Decimal Hexadecimal
Both <ESC> "D" nl
n2 . . . -CO> 27 68 nl n2 . . .
0
1B 44 nl n2 ,.. 00
Cancels all current horizontal tab stops and sets new tab stops at
columns nl, n2, etc. in the current character pitch (pica pitch if pro-
E
portional spacing is currently selected), where nl, n2, etc. are
numbers between 1 and 255. The maximum number of horizontal
tab stops allowed is 32 in Standard mode and 64 in IBM mode. The
tab stops must be specified in ascending order; any violation of
'XL..
ascending order terminates the tab stop list. Standard termination is
by the CO> control code. To clear all tab stops, specify <ES0 "D"
<o>.
Set horizontal tab stops every
n
columns
Mode ASCII
Decimal Hexadecimal
Std.
<ESC> "e" "0" n
27 101 48 n 1B 65 30 n
<ESC> "e" <O>
n
27 101 0 n 1B 65 00
n
Cancels all current horizontal tab stops and sets new tab stops every
n columns, where n is between 1 and 127.
I Reset all tab stops
Mode ASCII
Decimal Hexadecimal
IBM <ESC> "R"
27 82 IB 52
Resets the horizontal tab stops to their power-up values in which a
tab stop is set every 8 column starting at column 9. Also clears all
vertical tab stops.
Horizontal tab
Mode ASCII
Decimal Hexadecimal
Both <HT>
9 09
Moves the print position to the next horizontal tab stop. Ignored if
there is no next horizontal tab stop in the current line. Note that when
underlining is selected, spaces skipped by horizontal tabulation are
not underlined.