Star Micronics NX-2420 Multi-Font User Manual page 71

Execute <ES& "cA"
Mode ASCII
Decimal
Hexadecimal
LBM <ESC> "2"
27 50 1B 32
Sets the line spacing to the value defined by the last preceding
<ES0 "A" command. Sets the line spacing to l/6 inch if there is
no preceding <ES0 "A" command.
Line feed
Mode ASCII
Decimal Hexadecimal
Both <LF>
10
OA
Prints the current line and feeds the paper to the next line. See the
preceding commands for the line spacing.
Reverse line feed
Mode ASCII Decimal Hexadecimal
Std. <ESC> <LF>
27 10 18 OA
IBM <ESC> "1"
27 93 1B 5D
Prints the current line and feeds the paper in the reverse direction to
the preceding line. See the preceding commands for the line
spacing. Ignored when friction feed is used.
Select forward feed mode
Mode 1 ASCII Decimal Hexadecimal
Std. 1 <FS> "F' I 28 70
1 1C 46
Cancels the reverse feed mode and selects forward feed mode. This
is the default setting at power-on.
Select reverse feed mode
Mode ASCII
Decimal Hexadecimal
Std. <FS> "R"
28 a2
1C 52
Selects reverse feed mode. Reverses the direction of all vertical
movements. Ignored when friction feed or bottom feed is used.
63