Table of Contents
Advertisement
4. Make sure that the release lever is back.
If fanfold paper is already mounted in the printer, press the (
SETpkEillp
button to park the paper in the off-line state, then move the release lever
backwards.
5. Place a single sheet between the guides, placing the side on which you
want to print towards the back of the printer. Gently push the paper down
in the guides until you feel it stop.
6. Now press the ( SE&/f&CT ) button. The paper will be fed into the printer
and adjusted past the print head to a position ready for printing.
7. If you want to set the paper to a different position, set the printer off-line
by pressing the (
ON LINE
) button, then set the paper by using the
micro-feed function. (For details, refer to Chapter 2.)
Adjustable
paper guide
Figure I-17. Loading a single sheet
Advertisement
Table of Contents
