Set/Eject/Park Button; Pitch Button - Star Micronics NX-1020 User Manual

Rainbow
Hide thumbs Also See for NX-1020:
Table of Contents

Advertisement

If you also press the C
ON LINE
) button while you are line-feeding, the
paper will feed automatically to the top of the next page. This is explained
later.
If you press this button while on-line, this will alternately flash the
QUIET
indicator on and off. When in Quiet mode with the
QUIET
indicator lit, the
printer will print slightly slower, but at a reduced noise level.
SET/EJECT/PARK button
NOTE: This button has no effect if the bottom feed mode is selected.
Pressing this button causes the printer to begin paper loading if the paper has
not loaded while in the off-line state.
If the paper has been loaded, this button results in different functions de-
pending on the position of the release lever.
If the release lever is forward for fanfold forms, pressing this button parks
the forms.
If the release lever is back for single sheets, pressing this button ejects the
paper.
PITCH button
This button allows you to select the printing pitch. Remember that the printer
must be off-line for you to do this. Successive presses of this button will
illuminate (and select) the following options in order:
Pitch
Indicator(s)
Pica (10 CPI)
1OCPl
Elite (12 CPI)
12CPI
Condensed pica (17 CPI)
lOCPI, COND
Condensed elite (20 CPI)
12CPI, COND
Proportional
PROP

Advertisement

Table of Contents
loading

Table of Contents