Star Micronics NX-2420 Multi-Font User Manual page 90

Accept MSB as is
Mode ASCII
Decimal Hexadecimal
Std. <ESC> "#"
27 35 1B 23
Cancels the preceding commands and accepts the most significant
bit as it is sent to the printer.
Delete last character sent
Mode 1 ASCII
Decimal
Std. I <DEL>
1127
Hexadecimal
1 7F
Deletes the last character received. Ignored if the last character
received has already been printed, or if the last character received
was all or part of a command.
Cancel last line
IMode I ASCII ) Decimal I Hexadecimal 1
1 Both I <CAN>
1 24
I 18 I
Deletes the last line currently present in the print buffer.
Set printer off-line
Mode ASCII
Decimal Hexadecimal
Std. <DC3>
19 13
IBM
<ESC> "Q"
"S"
27 81 36 1B 51 24
Sets the printer off-line. The printer disregards all subsequent
characters and commands except <DCl>, which returns it to the on-
line state. The printer's
ON LINE
indicator does not go off.
Set printer on-line
Mode
ASCII Decimal Hexadecimal
Both <DCl>
17
11
Returns the printer to the on-line state, allowing it to receive and
process all subsequent characters and commands. This command is
ignored if the printer was set off-line by pressing the (
ON LINE >
button on the control panel.
82