Star Micronics NX-2420 Multi-Font User Manual page 83

Seiecf graphics mode
Mode ASCII
Decimal Hexadecimal
IBM
<ESC> "['I "g" nl n2
27 91 103 nl
n2
iB 58 67
nl n2
m0 ml m2 . . .
m0 ml m2 . . . m0 ml m2 . . .
Selects one of eight graphics modes depending on the value of m0
and prints dot graphics in this mode. The graphics image is (nl + n2
x 256) - 1 dots wide. See <ESC> "K" (for g-bit graphics) or <FS>
"Z" (for 24-bit graphics) for information on ml, m2, . . .
mO
0
1
2
3
8
9
11
12
Graphics mode
g-bit Normal-density
( 60 dots per inch)
g-bit Double-density (120 dots per inch)
g-bit Double-density, double-speed (120 dots per inch)
g-bit Quadruple-density
(240 dots per inch)
24-bit Normal-density ( 60 dots per inch)
24-bit Double-density
(120 dots per inch)
24-bit Triple-density
(180 dots per inch)
24-bit Hex-density (360 dots per inch)
Convert graphics density
Mode
ASCII
Decimal
Hexadecimal
Std. &SC> "?" n m
27 63
n m
IB 3F
n m
Converts graphics defined by subsequent cESC> "K", <ESC> "L",
<ESC> "Y" or <ES0 "2" commands to a density mode defined by
<ES0 "*". n is "K", "L", "Y" or "Z", indicating the mode to be
converted. m is a code from CO> to c4> or c6> indicating one of the
modes of <ES0 "*".
75
k