Paper Feed Button; Set/Eject Park Button; Pitch Button - Star Micronics LC24-15 User Manual

PAPER FEED button
If you press this button in off-line, the paper feeds forward. If you hold this
button down, the printer performs consecutive line feeds.
While you are feeding lines, if you also press the (
ON LINE
> button, the
paper will feed to the top of the next page. This is explained later.
If you press this button in on-line, this will alternately illuminate and
extinguish the
QUIET
indicator. When in Quiet mode with the
QUIET
indicator illuminating, the printer will print slightly slower, but at a reduced
noise level.
SET/EJECT PARK button
Pressing this button causes the printer to execute paper loading if the paper
has not loaded while in the off-line state.
If the paper has been loaded, this button causes the printer in different
functions depending on the release lever position.
If the release lever is set to the upward position for the fanfold forms, this
button operates to park the fanfold forms to the backward position.
If the release lever is set to the downward position for the single sheets,
pressing this button ejects the paper.
This button has no effect if the optional pull tractor unit is mounted.
PITCH button
This button selects the print pitch that will be printed. Remember that the
printer must be off-line for you to do this. Successive presses of this button
will illuminate (and select) the following options in this order:
Pitch
1 Indicator(s)
Pica
10
CPI
Elite 10 CPI, 15 CPI
Semi-condensed 15 CPI
Condensed pica
10 CPI, COND
Condensed elite
10 CPI, 15 CPI, COND
Proportional PROP
Condensed proportional
COND, PROP
Holding down this button will cycle continuously between these options.
21