Table of Contents
Advertisement
Switches C-3 and C-4: What is the page length of your paper?
I
j
Leave these switches ON if you will bc using 1 l-inch forms. You will need
to change the switches if you will be using a different page length as shown
(
below:
Switch D-l: The action of this switch depends on the mode chosen with
switch A-l.
If you sclccted Standard mode, do you want italic or graphic
characters?
Move this switch OFF to print italics in the Standard character set. If you
leave this switch in the ON position, in place of italics you will get the
graphic characters, international characters, and mathematical symbols of
IBM character set #2. See Chapter 9, character codes 128 to 254.
If you selected IBM mode do you want IBM character set #l or#2?
ON selects character set #2, which is for computers with an S-bit interface
(the most common kind). OFF selects character set #l, for computers with
a 7-bit interface.
/
6
Switches D-2 to D-4:Do you want an intcmational character set or IBM
/
code page?
i
1
International character sets differ in their assignment of 14 character codes
t
in the Standard Italic character set. See the character tables at the back of this
i
manual. With these switches you can sclcct one of eight character sets as
j
follows:
I
L
41
Advertisement
Table of Contents
