Star Micronics NX-2420 Multi-Font User Manual page 56

Select LQ proportional characters
Mode ASCII Decimal
Hexadecimal
IBM <ESC> "I" <3>
27 73 3 18 49 03
Changes to letter quality characters with proportional pitch. Ignored
if the m or (ml button was pressed during power-up.
Select LQ font
Mode ASCII Decimal Hexadecimal
Both <ESC> 'I? n
27 107 n 18 6B n
Std.
<FS> "C" n
28 67 n 1C 43
n
Selects an LQ font according to the value of n. In draft mode, this
command remains dormant and takes effect later when LQ is
selected. Ignored if the (-3 button was pressed during power-
up or the corresponding font is not installed.
n Font n Font
0 Roman
1 Sanserif
2 Courier
3 Prestige
4 script
5 OCR-B (Option)
6 OCR-A (Option)
7 Orator (Option)
8 Orator 2 (Option)
9 TW-Light
(Option)
10 Letter Gothic (Option)
11 Blippo
(Option)
12 H-Gothic (Option)
13 Orane (Option)
14 Cinema
(Option)
15 Code 39 (Option)
Select font
IMode 1 ASCII 1 Decimal 1 Hexadecimal I
1 Both 1 "(9. "(9, "F' '.),, '.),9
n I 40 40 70 41 41 n 1 28 28 46 29 29 n I
Changes a font according to the value of n. Ignored if the (K5K)
button was pressed during power-up.
n Font n Font
0 Roman 3 Prestige
1 Sanserif 4 script
2 Courier 9 Draft
48