Factory Settings - Star Multi-Font XR-1020 User Manual

3
If you get double line spacing when you expect single spacing, or if lines
overprint each other, try changing the setting of this switch.
l
Auto Carriage Retum with LF
If you set this switch [DISABLED], a separate carriage-return code is re-
quited from your computer to return to the left margin
If you set this switch PENABLED], the printer performs both a carriage
return and line feed each time it receives a line-feed code.
l
Carriage centering
If you set this switch [ENABLED], the carriage moves to the center each
time to feed paper near the perforations. It is recommended to match the
-
page length setting to your fanfold paper, otherwise, this function does not
work properly at the perforations.
- -
If you leave this switch PDISABLED], the &age does not move when
-
feeding paper.
l
Lines per Inch
-
Sets how many lines to be printed in one inch.
l
Pagelength
You can set a different page length to accommodate your paper with this
switch.
Factory settings
This option clears all current settings, and restores the Factory Settings to the
Memory Switch.
62