Table of Contents
Advertisement
3. While holding the [FoNTI button, press the I LL I'=~-{
PARK
button. The
indicators beside the IFoNT button will blink to show the current color
setting.
4. If you want to change the color, press the I St ' tJtC ' I
l=aRK
button while
holding the I]
button.
The relation between the indicators and the color is shown below.
Color
Indicators
Black
SANSERIF
Magenta SANSERIF, COURIER Orange ORATOR, SCRIPT
cyan
COURIER
fJFJ!y
Violet
COURIER, ORATOR
5. Release both buttons after you set the desired printing color. If you want
to save the selected color forlateruse, store it using the Macro Definition.
NOTE :This function is valid only when the color ribbon is installed into the
printer.
Selecting the ASF bin number
Youcanusethedual-bin
type AutomaticSheetFeeder(SF-IORMII/l5RMII)
with this printer.
You can select this ASF bin number by the control panel operation as shown
below:
1. Press the [
ON LINE
J button to set the printer off-line.
2. Press the l7GHl
button and hold it down.
3. While holding down the I\
button, press the
( PAPER FEED
1 but-
ton.
4. Each time you press the
I PAPER FEED
] button while holding down the
I]
button, two indicators above the IJ
button will blink (to
indicate that bin #l is selected), or all indicators above the [PrTCHI but-
ton will blink (to indicate that bin #2 is selected).
5. Release both buttons after you set the desired ASF bin number.
NOTE:This function is valid only when the Dual-bin ASFis selected by the
Memory Switch setting.
Advertisement
Table of Contents
