Star Multi-Font XR-1020 User Manual page 96

Set horizontal tab stops
Mode
ASCII Decimal Hexadecimal
Both &SC> '9" nl n2
. . . .
<o> 27 68
nl
n2 ~~ 0 10 44
nl
d ~. 00
Cancels all current horizontal tab stops and sets new tab stops at
columns nl, n2, etc. in the current character pitch (pica pitch if
proportional spacing is currently selected), where nl, n2, etc. are
numbers between 1 and 255. The maximum number of horizontal
tab stops allowed is 32 in Standard mode and 64 in IBM mode. The
tab stops must be specified in ascending order; any violation of
ascending order terminates the tab stop list. Standard tennination is
by the <o> control code. To clear ah tab stops, specify &SO "D"
Co>.
Set horizontal tab stop every n columns
Mode ASCII
Decimal Hexadecimal
Std.
&SC> "err "0'
n
27 101 48
n
106530
n
cESC> "e" cO> n 27 101 0
n
106500 n
Cancels all current horizontal tab stops and sets new tab stops every
n columns, where n is between 1 and 127.
Reset all tab stops
Mode ASCII Decimal Hexadecimal
IBM <Esc> "R"
27 82 10 52
Resets the horizontal tab stops to their power-up values in which a
tab stop is set every 8 column starting at column 9. Also clears all
-
vertical tab stops.
-
Horizontal tab
Mode ASCII Decimal
Both dfn
9
Hexadecimal
09
Moves the print position to the next horizontal tab stop. Ignored if
there is no next horizontal tab stop in the current line. Note that when
underlining is selected, spaces skipped by horizontal tabulation are
not underlined.
88