Star Multi-Font XR-1020 User Manual page 90

Set page length to n lines
Mode ASCII
Decimal Hexadecimal
Both cESC> "c" n
27 67
n
1B 43
n
Sets the page length to n lines in the current line spacing, where n is
between 1 and 127 in Standard mode or between 1 and 64 in IBM
-~
mode. Changing the line spacing later does not alter the physical
page length. The current line becomes the top of the page.
Set page length to n inches
Mode ASCII
Decimal Hexadecimal - ---
Both
<ESC> "C" CO> n
27 67 0
n
lB4300
n
Sets the page length to n inches, where n is between 1 and 32 in
Standard mode or between 1 and 64 in IBM mode. The current line
becomes the top of the page.
Set bottom margin
Mode ASCII
Decimal Hexadecimal
Both cESC> "IT'
n
27 70
n
1B 4E
n
Sets the bottom margin to n lines, where n is between 1 and 127 in
Standard mode or between 1 and 255 in IBM mode. The bottom
margin is reset when you change the page length.
Cancel bottom margin
Mode ASCII
Decimal Hexadecimal
-
Both
<ESC> "0"
27 79 1B 4F
-
Cancels the bottom margin.
Form feed
Mode ASCII Decimal Hexadecimal
Both <FF>
12 oc
Feeds the paper to the top of the next page according to the current
page length, and moves the print position to the left margin. When
the automatic sheet feeder (ASF) is selected with Memory Switch
setting, this command ejects the current page.
82