Appendix B: Making Dip Switch Settings; Accessing The Dip Switches - Star SP298 SERIES User Manual

Appendix B: Making DIP Switch Settings

The printer's DIP switches let you specify communications parameters, receive
buffer size, and emulation. This Appendix explains the settings you can make
and tells you how to actually change DIP switch settings.

Accessing the DIP switches

The DIP switches are located inside the printer, underneath the document table.
Use the following procedure to remove the document table so you can operate
the DIP switches.
Make sure that the printer is turned off and unplugged from its wall outlet.
Remove the printer cover.
While using a screwdriver or other similar instrument to press down at the
location marked (a) in the illustration below, carefully slide the document
table in the direction indicated by the arrow until it is out of the way.
102
a