Star Multi-Font XR-1020 User Manual page 86

Return
to normal height
Mode ASCII Decimal Hexadecimal
Std.
&SC> "W" "0"
27 119 48 1B 77 30
&SC> "W" co> 27 119 0 1B 77 00
Terminates double-height printing and prints subsequent characters
at normal height.
Resumes super/subscript and condensed printing if these modes
were in effect before double height was selected.
-
Select character height, width, and line spacing
-' -
Mode ASCII Decimal Hexadecimal
Both
cESC> "[., "@" <4> CO> 27 91 64 4 0 1B 58 40 04 00
&cO>n m 0 0 nm WOO nm
Selects a combination of character height, width, and line spacing
according to the value of n and m, as below. Does not move the base
line.
n Line spacing Character height
0 Unchanged
Unchanged
1 Unchanged
Single height
2 Unchanged Double height
16 Single Unchanged
17 Single
Single height
18 Single Double height
32 Double Unchanged
33 Double Single height
34 Double Double height
m Character width
1 Single width (same as <ESc> "W" 0)
2 Double width (same as &SC> "w" 1)
-
Double-height characters are always printed at near letter quality.
Double height printing temporarily cancels the super/subscript and
condensed printing modes, but these modes resume when the printer
returns to normal mode.