Table of Contents
Advertisement
Release lever
Paper pide
F/gum 411. Tear off the printed fanfold paper.
6. Mount the paper guide in the upright position.
Now you can load single sheets. The fanfold paper remains parked at the back
of the printer.
NOTE: You cannot park the fanfold paper if you have loaded it using the
optional Pull Tractor Unit.
Paper unparking
When you want to resume using fanfold paper, the procedure is as follows.
1. Remove all single sheets from the printer.
2. Mount the paper guide in the horizontal position.
3. Move the release lever to the backward.
4. Press the P' "'=-
7 button. The printer will automatically feed the
parked fanfol&a&-
back into position for printing.
NOTE : The printer beeps intermittently if you move the release lever while
the paper is loaded.
Advertisement
Table of Contents
